Air Bellows Suspension Spring Pocket Shock Absorber for Suspension

Product Description

The air spring is filled with compressed air in a sealed container and uses the compressibility of the gas to achieve its elastic bai effect. The air spring has ideal non-linear elastic characteristics. After the height adjustment device is installed, the height of the vehicle body does not change with the increase or decrease of the load. The spring stiffness can be designed to be low and the ride comfort is good. However, the air spring suspension has a complicated structure and high manufacturing cost.



 Air spring advantages:

1) Air springs have excellent nonlinear and hard characteristics, which can effectively limit the amplitude, avoid resonance and prevent shock. The non-linear characteristic curve of the air spring can be ideally designed according to actual needs, so that it has a lower performance near the rated load.

The stiffness value of .

2) Since the medium used in the air spring is mainly air, it is easy to implement active control.

3) The stiffness k of the air spring changes with the load P, so under different loads, the natural frequency of its vibration isolation system is almost unchanged, and the vibration isolation effect is almost unchanged.

4) The stiffness of the air spring is adjustable, and the stiffness of the system can be changed by changing the volume of the air chamber or the pressure of the inner cavity. Regardless of the load, the air pressure can be changed as needed to adjust the stiffness of the air spring, or the internal volume of the auxiliary air chamber can be increased to reduce the stiffness.



5) For air springs of the same size, when the internal pressure changes, different bearing capacities can be obtained. This allows the same air spring to meet the requirements of multiple loads, so it is economical. The air spring can bear a certain lateral load and transmit torque while bearing the vertical load.

6) Increasing the total volume of the air spring can reduce the natural frequency of the vibration isolation system, which is a unique advantage of the air spring. The volume of the air spring body, due to certain restrictions on the size of the structural space, cannot be too large. In order to reduce the natural frequency of the vibration isolation system, an auxiliary air chamber can be set, which can be arranged far away from the air spring. The volume of the auxiliary air chamber increases, that is, the total volume of the air spring is increased, and the natural frequency of the air spring vibration isolation system is reduced.

7) The air spring can use a height control valve system to keep the working height basically unchanged under different loads. Similarly, the height control valve can also be used to make the air spring have different heights under a certain load, so it can adapt to various structural requirements.



 8) The air spring can absorb high frequency vibration and has excellent sound insulation performance.

 Air spring is mainly composed of rubber bag and air. During the vibration process, the rubber bladder has little internal friction due to expansion and warpage, so it is difficult to transmit high-frequency vibration. Air and rubber are not easy to transmit sound, so they have good sound insulation performance. The steel spring is easy to transmit high-frequency vibration and sound.

9) If an orifice is set between the main air chamber and the auxiliary air chamber of the air spring, when the air spring vibrates and deforms, a pressure difference will occur between the main and auxiliary air chambers, and the air flowing through the orifice absorbs part of the energy due to resistance , Thus having a damping effect. A proper throttle aperture can improve the damping characteristics of the vibration isolation system and effectively suppress the resonance amplitude.

10) The air spring is light in weight. Except for the rubber bladder and almost weightless air, its body is the upper cover and the lower cover, so it is much lighter than the steel spring.

Certification


Package 


Transportation, Payment




How to send the product to me?
Answer: The method of transportation is up to you. We can also recommend a more economical transportation method for you!
For small batch products under 30 kg, express delivery (DHL, FedEX, TNT, UPS, EMS or others) is usually used.
30-500kg orders can be airlifted to your designated airport. For large or large quantities, we often use sea freight.


1. Question: Are you a factory or a trading company?
Answer: We are a professional processing factory + trading company.
2. Question: Do you make customized products?
Answer: Yes, all parts are customized according to customer's drawings or samples. If you want to manufacture any parts, please feel free to send us your drawings or samples.
3. Q: Will you be safe after we receive the drawings?
Answer: Yes, we will not disclose your design to third parties without your permission. Before you send the drawing to us, we can sign a confidentiality agreement.
4. Q: What is your minimum order quantity?
Answer: Usually we do not set the MOQ, but the price will be cheaper when the quantity is large. We are happy to provide customers with samples to ensure quality standards.
5. Ask. Do you provide samples? Is it free or extra?
If you want to check the samples first, you need to pay the sample fee, and the fee will be refunded to you after confirming the bulk order.
6. What payment terms do you accept?
Wire transfers, Western Union, Paypal, Trade Assurance are accepted, so please let us know which is convenient for you.